- ADJUSTABLE: Vertically adjustable from the cockpit for a better sail trim. Code 0 luff tension is easily adjustable from the cockpit.
- Jibe in a matter of seconds rather than minutes.
- Below deck hinge mount OR deck or bow roller hinge mount
- Easily removable. Quick release pins or bolts.
- Can be stowed in an upright position when not in use. No need to worry about paying extra fees at your marina!
- 100% carbon fiber frame with no CF to metal bonds.
The Trogear Bowsprit is suitable for boats 20-70ft. The AS-25 is for sailboats up to 25 ft, AS-30R for 35ft, the AS-40 is for sailboats up to 35ft , and AS-50 for up to 45ft. For Monohulls, Catamarans or Trimarans.
See the Bowsprit Comparison Chart for more details or contact us if in doubt – we are more than happy to help!
We keep a running list of adopters and the bowsprit they selected in our gallery section for reference: View adopter list.
We offer several excellent methods of installation: (See more)
Below Deck Through Hull Hinge Mount:
The preferred installation method is to install a hinge tube across the bow. It is located about 2″ from the top of the deck and about 10-13″ aft from the tip of the bow (specific placement depends on your boat). The fiberglass hinge tube is glassed into the hull, though the A-Sprit is removable.
Through Hull Installation Manual (pdf)
Deck Mounting:
In some instances, such as boats with a bow anchor roller, deck mounting the Trogear works better. We have custom designed mounting brackets for this purpose which will work in many cases. It is also possible to attach the Bowsprit to the anchor roller. Please contact us or consult your rigger with any questions.
Side Mounts – Below Deck
Made from carbon fiber and suitable for yachts with narrow bows around 40 degrees including trimarans. When using these side mounts, the Bowpsrit attachment point is moved forward offering more extensions past the bow.
ABSOLUTELY. We have custom designed mounting brackets for this purpose which will work in many cases. Please contact us or consult your rigger with any questions.
Please contact us with any questions. In some cases we can design attachments for you. See selection
How far the bowsprit protrudes past the bow depends on the individual boat bow angle and installation method. However, the following are general guidelines.
Extension of tack past the bow:
AS-25 and 30R: ~24″ (61cm)
AS-40 and 50: ~36″ (91.5cm)
ATLAS: ~45″ (115cm)
MAXI: ~78″ (200cm)
The Trogear Bowsprit can be stowed in an upright position when not in use. No need to worry about paying extra fees at your marina, when at a guest dock or the need to modify your trailer!
Depending on your level of technical skill and overall comfort, you can definitely install the Trogear Bowsprit yourself. It is not a difficult process, but it does require careful measurements to insure the best fit.
If in doubt at all, contact us or consult your rigger.
Yes it is. Attachment is either with quick release pins or bolts.
If bolted, just remove one bolt and then slide out the hinge shaft.
However, the Trogear bowsprit is so good looking that most people leave it on their boat!
There are a few options for boats with an anchor on a roller. Each set up is unique so providing us with details will allow us to configure the best solution for you.
Options include, deck mounting, through hull and attaching to the anchor roller itself. We have worked with owners and riggers worldwide to determine the best solution, and can design custom parts if needed.
Contact us at info@trogear.com for assistance.